Aluminium Blade Fence Panel 2.4m Wide - Black

All Future Fence panels can be cut down to specific lengths when installing.  Simply turn your panel over, mark out the required length on the top and bottom rails and cut with a circular saw or grinder. 

While any Future Fence post can be used, the difference is mainly visual. We suggest using 65 x 65mm posts to match the 65 x 65mm frames on the sides of our Blade gates, however all Future Fence posts will work with our Blade panels.

Yes, Future Fence panels in 1200, 1500 and 1800mm heights meet the Australian dimensional and loading requirements under AS1926.1 2012.  Our panels have been independently tested by a NATA accredited facility with testing reports available on request.   Our recommended installation instructions can be downloaded here.  

Please note: Your local council or state may have requirements in addition to the Australian Standards and we suggest planning your pool fence in advance with your pool builder and/or certifier. 

Future Fence panels can be mounted using our standard brackets or angle brackets (sold separately).  Standard brackets sleeve over the rail and mount to the side of the post.  Our angle brackets can be used to run your panels over the front of the post. 

Absolutely - all Future Fence panels come with aluminium powder-coated caps included in the panel price.

Not every block is flat.  Our panels can be stepped down in height, cut on a rake under the bottom rail to the slope of the land, or a combination of both.  Here is an example of where Future Fence panels have been cut on a rake to follow a 150mm change in level over of the length of a panel, with the next post stepped at an equal height. 

No - our panels have not been designed or engineered for use as balustrades over 1m off the ground.